HOMETtatani
Keep the floor warm and tight~ Ttatani
Enhanced with excellent heat transfer and heat accumulation, maintaining warmth for a long time, excellent load-bearing capacity for a tight floor presentation.
Buy Nowcheck point
Smart Hot Water Heating System that Saves Heating Costs, Addresses Interfloor Noise
100% Water Heating
Solves harmful electromagnetic waves using 100% water!
Zero Leakage
No leakage with seamless installation, and left-right separated heating is possible
Reduced Interfloor Noise! Increased Insulation Effect!
Effective insulation and soundproofing with the same effect as 100T styrofoam
Excellent Compatibility
Compatible with all boilers, including electric, gas, oil, and bio boilers.
Same-day Installation, Same-day Heating
DIY installation possible, and heating is available from the same day
High-Quality EPP Material
Uses fire-resistant EPP material that is resistant to heat and remains unchanged even in hot water.
Product Options
- A Type
- B Type
- C Type
- D Type
EPP Board + Heat Conductive Plate(0.4T) + Bare Board(4T) + Hose(EPDM or PERT)
| Specifications | Required Material Consumption per 3.3㎡ | ||
|---|---|---|---|
| EPP Board | (Width) 900mm, (Height) 900mm, (Thickness) 21mm, (Hose Spacing) 120mm | 4 sheets | |
| Heat Conductive Plate | (Width) 900mm, (Height) 608mm, (Thickness) 0.4T | 6 sheets | |
| Bare Board | (Width) 980mm, (Height) 570mm, (Thickness) 4T | 6 sheets | |
| Hose | EPDM Hose | Inner diameter 8a, outer diameter 12mm | 25m |
| PERT Hose | Inner diameter 9.5a, outer diameter 12mm | ||
Finish Material: It is recommended to use finish material without adhesive (e.g., SPC Floor Tile, Reinforced Floor Tile, floor tiles, etc.)
EPP Board + Heat Conductive Plate(0.4T) + CRC Board(4.5T) + Hose(EPDM or PERT)
| Specifications | Required Material Consumption per 3.3㎡ | ||
|---|---|---|---|
| EPP Board | (Width) 900mm, (Height) 900mm, (Thickness) 21mm, (Hose Spacing) 120mm | 4 sheets | |
| Heat Conductive Plate | (Width) 900mm, (Height) 608mm, (Thickness) 0.4T | 6 sheets | |
| CRC Board | (Width) 1800mm, (Height) 900mm, (Thickness) 4.5T | 2 sheets | |
| Hose | EPDM Hose | Inner diameter 8a, outer diameter 12mm | 25m |
| PERT Hose | Inner diameter 9.5a, outer diameter 12mm | ||
Finish Material: It is recommended to use finish material without adhesive (e.g., SPC Floor Tile, Reinforced Floor Tile, floor tiles, etc.)
EPP Board + Heat Conductive Plate(0.8T) + Bare Board(4T) + Hose(EPDM or PERT)
| Specifications | Required Material Consumption per 3.3㎡ | ||
|---|---|---|---|
| EPP Board | (Width) 900mm, (Height) 900mm, (Thickness) 21mm, (Hose Spacing) 120mm | 4 sheets | |
| Heat Conductive Plate | (Width) 900mm, (Height) 608mm, (Thickness) 0.8T | 6 sheets | |
| Bare Board | (Width) 980mm, (Height) 570mm, (Thickness) 4T | 6 sheets | |
| Hose | EPDM Hose | Inner diameter 8a, outer diameter 12mm | 25m |
| PERT Hose | Inner diameter 9.5a, outer diameter 12mm | ||
Finish Material: It is recommended to use finish material without adhesive (e.g., SPC Floor Tile, Reinforced Floor Tile, floor tiles, etc.)
EPP Board + Heat Conductive Plate(0.8T) + Bare Board(2T) + Hose(EPDM or PERT)
| Specifications | Required Material Consumption per 3.3㎡ | ||
|---|---|---|---|
| EPP Board | (Width) 900mm, (Height) 900mm, (Thickness) 21mm, (Hose Spacing) 120mm | 4 sheets | |
| Heat Conductive Plate | (Width) 900mm, (Height) 608mm, (Thickness) 0.8T | 6 sheets | |
| Bare Board | (Width) 900mm, (Height) 608mm, (Thickness) 2T | 6 sheets | |
| Hose | EPDM Hose | Inner diameter 8a, outer diameter 12mm | 25m |
| PERT Hose | Inner diameter 9.5a, outer diameter 12mm | ||
Finish Material: It is recommended to use finish material without adhesive (e.g., SPC Floor Tile, Reinforced Floor Tile, floor tiles, etc.)
